The Dent Brothers | Paintless Dent Removal in Canberra

Why PDR is Better than Traditional Dent Repair

/ Tips / By

Introduction

If you are looking for a professional and affordable paint repair service, look no further than PDR. We have been providing quality car painting services to Canberra. Our team is highly skilled and experienced, so we can guarantee that our work will be done right!

We offer a variety on your vehicle today!

What Is Paintless Dent Removal?

Paintless dent repair is a process that uses special tools to remove dents and other imperfections from your vehicle without having to use any type of paint. You can use this process on all vehicles, including cars, trucks, SUVs, and vans. It’s also one of the most affordable ways to fix minor damage to your car or truck. with one of our experts.

Why PDR is Better than Traditional Repainting

  • 1. PDR Saves Time and Money. If you are tired of spending time painting, sanding, priming, and repainting your vehicle, then the Paintless Dent Removal (PDR) process may be for you. The PDR process allows you to remove dents from your car without having to paint or prime it. It also helps keep your vehicle looking new for longer.
  • 2. PDR Preserves the Vehicle’s Original Value. The PDR process is straightforward. All you have to do is get special tools to help you remove dents. Then, when you sell your car, the PDR process makes it easier to sell.
  • 3. PDR Eliminates the Need for Repainting. Most people think they need to repaint their vehicle before they can fix dents. However, using the PDR process, you won’t have to repaint your vehicle.
  • 4. PDR Is Cost-Effective. The PDR process cost is much less than it would take to repaint your vehicle and resell it. Plus, if you use the PDR process instead of repainting your car later, you’ll save even more money.

Here’s what happens when you repaint your vehicle:

• Paint chips off easily.

The paint is less durable than before repainting. You have to do a lot more work to get rid of scratches and imperfections on the surface. Here are some things you should know if you’re considering respraying your car.

• Paints fade faster than the original finish.

Repainting your car will make it look old. You’ll need to spend more money on repairs after repainting. If you don’t like the colour of your new paint job, you’ll need to repaint it. It takes time to remove all the old paint from your vehicle.

• Exterior finishes crack and peel.

You might think the exterior paint on your vehicle looks great, but it could be cracking or peeling. It is because the colour of your car is layers of different materials. When you repaint your vehicle, you remove those layers and expose the underlying material. Unfortunately, it means that the paint will start to wear out sooner. As a result, it’s hard to match colours exactly.

• Water damage occurs.

If you notice water spots on your vehicle, they probably came from rainwater seeping into the seams between the body panels. Water can also enter through tiny cracks around windows and doors. These places are usually hidden under the trim and seen by the naked eye. However, once the water gets inside the vehicle, the metal parts start to rust.

• Rust forms.

When moisture collects in certain areas, it creates an environment for bacteria to grow. Bacteria eat away at the metal parts until they become rusty. Rust stains the interior and makes your vehicle less attractive.

• Your vehicle becomes dirty.

Dirt accumulates over time because there isn’t enough ventilation inside your vehicle. Dirt can cause odours and attract dirt-eating insects. You should clean your car regularly so that it doesn’t smell foul.

• It costs more to maintain.

Repaints charge higher prices for their services. They use special equipment to clean the surfaces and apply protective coatings. To keep your vehicle looking good, consider having it professionally painted instead of repainting it yourself.

• You’re stuck paying for expensive touch-ups.

If you decide to repaint your vehicle yourself, you’ll spend a lot of money on touch-up paints. In addition, touch-up colours cost much more than regular ones. So even though you might save money by doing it yourself, you’ll still pay more in the long run.

So before you decide to repaint your vehicle, consider these tips:

• Use quality paints. The best colour is the one that lasts the longest and doesn’t chip or peel off.

• Don’t use a spray can. Spray cans are quick applications of paint on large surfaces. However, they don’t work well on small areas like trim pieces.

• Avoid using aerosol products. These sprays contain propellants that may cause damage to your finish.

• Clean up spills immediately. Spills will leave marks behind if not cleaned right away.

• Match colours carefully. If you have two different colours in the same area, they should be close enough, so it looks natural. If you need to repaint, make sure you know what paint you want. Many finishes are available, including clear coat, semi-gloss, satin, gloss, flat, metallic, etc. You also have choices between single-colour or multi-colour options.

• Don’t skimp on prep work. Ensure all loose dirt, dust, and grime from the surface. It includes removing any old sealant or primer.

Paintless Dent Removal: What It Is, How It Works and Why You Need It

If you’ve ever been in an accident or had a car crash, then you know that the damage to your vehicle can be extensive. The good news is that there are ways to repair it without paying for expensive repairs. One of these methods is paintless dent removal. This method involves using special tools and techniques to remove dents from cars without damaging the rest of the bodywork. If you want to learn more about this process, keep reading!

What Is Paintless Dent Removal?

When you have a small dent in your car, you may not even notice it. However, if you look closely at your vehicle, you will see that some areas of the bodywork are bulging outwards. These bulges occur because of stress caused by the impact of another object. When this happens, the metal underneath the surface begins to expand. As the metal expands, it causes the area around it becomes deformed. Over time, the deformation becomes permanent and creates a dent.

This type of dent is called a “paint-to-body dent.” It usually appears on the hood, roof, doors, fenders, bumpers, etc. You can fix them without replacing parts.

What Is the Process of Paintless Dent Removal?

The first step in this process is to locate the dent. To do this, you must use a “dent puller.” A dent puller has two main components: a handle and a rod. The handle allows you to hold the tool while the rod goes into the dent. Once the rod is in the dent, we will put it out of the dent by rotating the handle. This action causes the dent to pop out of its hole.

  • Discs and RodsDent removal tools, such as a disc or rod, are used to remove dents. A cylinder is a tube-shaped object. It has two ends and an opening at one end. One end cap, a flat piece of metal with a hole, is attached to the cylinder using a bolt. The other end cap, which is also flat but with no gap, is held onto the cylinder using a nut and lock washer. The end caps slide along the rod as it is into the cylinder; this helps keep them in place. As they travel down the length of the cylinder, they push against the sides of the dent. This movement causes the dent to expand outward. Once the dent develops, the end caps come together, and the dent pops out of its hole. You can reuse the lids until the next dent appears.
  • Dent PullersDent pullers are available in several types. Some have plastic handles, while others have wood. Most also include a rod. There are many brands of dent pullers available today. They vary in size and shape. Some are to fit only one type of dent. Other dent pullers use for multiple types of dents. 

Types Of DentsMost cars have dents. These dents can range in size from minor bumps to large holes. In some cases, the dent may even extend through the entire thickness of the car. Different types of dents require various tools for their removal. For example, if the dent extends across the whole width of the vehicle, you would need a wide-width dent puller. On the other hand, if the dent is near the edge of the car, you might need a narrow-width dent puller. Narrow-Width DentsThese dents are on the edges of the car. They are usually when the vehicle hits something challenging, such as a curb or tree. Narrow-width dents are often difficult to remove because they are so close to the edge of the vehicle. To remove dents from the body of a car, you need a narrow-width tool with a fragile blade and a long handle. The best narrow-width dent pullers have a curved tip at the end of the edge. It allows you to get under the dent without damaging the paint.

Wide-Width Dents The wide-width dent puller is for removing wide-width dents. Wide-width dents occur when the car hits something soft, like a curb or another vehicle. A wide-width dent puller should be able to reach into the hole and grab the metal around it. It should also have a sharp point at the end of the handle. The wider the dent, the larger the puller needs to be.

  • Magnetic Ball This tool helps remove magnetic dents. Magnetic dents are when magnets are inside the car. The magnet attracts the car’s metal parts, causing them to stick together. It makes it impossible to remove the dent. Instead of trying to remove the dent, you can use a magnetic ball to remove the metal pieces—the ball with iron filings. When the ball is on top of the dent, the iron filings will cling to the metal pieces and pull them apart. To remove the metal pieces, they can pull them apart using a hammer.

What Advantages Does Paintless Dent Removal Offer Over Traditional Methods?

  • Shorter Process Time, Less Labor. Paintless dent repair is a process that involves using special tools to remove dents from the body of your vehicle without having to use any type of paint or filler material. This process can be used on most cars and will not void your warranty. It’s also much faster than traditional methods of repairing dents.
  • No Repainting is Required. If you have ever had a car repainted, then you know how expensive this can be. If you want to save money on your next auto repair, consider using a paintless dent removal service.
  • Less Risk To Your Vehicle. When you go through the process of painting over a dent, there is always a chance that you could make an error in applying the paint. It means you may end up with a patch job instead of a smooth finish. With paintless dent removal, you don’t have to worry about making mistakes because the process is entirely hands-off. You will install the patch without needing to touch the damaged area.  

 Why choose PDR? The best part about choosing PDR is that it is one of the fastest ways to get rid of dents on your vehicle. Many companies out there claim to offer immediate results, but they frequently aren’t as reputable as others. When you choose PDR, you can rest assured knowing that you are working with a company that offers top-notch customer service and quality artistry. They also have a fantastic warranty which ensures that if anything goes wrong with their work, they will fix or replace it free of charge! Contact us to get a free consultation. Please contact us anytime if you want more information regarding our services. We look forward to hearing from you soon!

Conclusion

PDR is an excellent option for those who want to quickly remove dents in their vehicles without paying a fortune. In addition, this is the place to be if you are looking for a company that does quality work.